Product introduction:
Hammer mill is the most ideal milling equipment of all kinds of wood piece, straw,
grass, stalk, tree branches, waste cardboard, bamboo, wood scraps, corn stalk, peanut shell,
wheat stalk, wood fuel, cotton stalk, biomass shell and so on. This kind of Wood grinder
mill is widely used in foddor factory, Swine farm, wood factory, etc. Wood grinder hammermill is
equipped with high carbon steel blade. The raw materials can be crushed into straw
particles, whose diameter is 3-6 mm. The durable hammer mill works with high efficiency and
gains more good reputation from European users.
Speicifcation of hammer mill:
Model | Power | Capacity | N/G weight | Packing size | Qty in 20' container |
CF158 | 2.2kw/3kw | 100-500 kg/h | 75/95 kg | 48*58*63 cm | 140 sets |
CF198A | 7.5hp gasoline | 200-700 kg/h | 120/140 kg | 96*62*105 cm | 40 sets |
CF198B | 4kw 380v | 200-700 kg/h | 120/140 kg | 90*58*102 cm | 46 stes |
CF420A | 15hp diesel | 500-1200 kg/h | 330/360 kg | 147*73*109 cm | 20 sets |
CF420A | 22hp diesel | 800-1600 kg/h | 350/390 kg | 147*74*111 cm | 20 sets |
CF420B | 7.5kw 380v | 500-1200 kg/h | 300/320 kg | 112*82*107 cm | 24 sets |
CF420C | 11kw 380v | 800-1600 kg/h | 330/360 kg | 113*75*108 cm | 26 sets |
CF500A | 55hp diesel | 1000-3000 kg/h | 800/840 kg | 149*146*121 cm | 10 sets |
CF500B | 22kw 380v | 1000-2500 kg/h | 600/630 kg | 124*97*106 cm | 18 sets |
Working principle:
The grinding hammer mill machine is fixed with an engine and a power of RP-driven all kinds of different power.
After the raw materials were put into crushing chamber, the high-speed operated hammer sheets will impact the raw materials over and over again, then the raw materials will be crushed into pre-set size step by step. Then the crushed materials will be leak out from the sieve. The draught fan will convey the leaked materials into separator centrifuge. Finally, the powder material will be discharged down below and the air will be discharged upper.
Pictures of hammer mill:
